Positioning feedbak on ET200S

Hello.

I need to connect an incremental encoder to a counter-module ( 6ES7 138-4DA04-0AB0 ) on an ET200S node for positioning feedback. I have chosen the 6ES7 138-4DA04-0AB0 W in my HW configuration.

The node is connected to a CPU 314C which onboard has 4 counter channels.
In the CPU I am able to use SFB 47, “common counter module” to setup jobs for the counter.

But on the SFB 47 I need to specify a channel and I can’t seem to find that channel for the encoders that are connected to the ET200S node, therefore I assume that I can’t use SFB 47 in this setup.
But what can I use instead?   

Please see brief instructions in commissioning 1COUNT module in the ET200S Technology functions manual

https://support.industry.siemens.com/cs/ww/en/45977588/18754760971

Robster

Please see brief instructions in commissioning 1COUNT module in the ET200S Technology functions manual

https://support.industry.siemens.com/cs/ww/en/45977588/18754760971

 

 

I am sorry sir, but the link you are referring to does not seem to exist. Could you please send me the file or a new link

Hi, 

here is th working link: https://support.industry.siemens.com/cs/document/45977588/simatic-et-200s-technological-functions?lc=en-WW

Hope that helps