Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Positioning with S120

Created by: k.bilic at: 4/17/2014 7:33 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/17/2014 7:33 PM	Rate (0)
k.bilic Posts: 19 Rating: (0)	Hi guys. I need to implement positioning function with PLC S7-300 (with step7) and S7-1500 (with tia portal). I am using S120 with CU 310 PN. How can I set up S120 to work in positioning mode, and with what function blocks can I send absolute position to drive? I know how to configure positioning that I can control from Starter, but is there any difference in setting it up so I can control it from PLC? Thanks.
k.bilic Posts: 19 Rating: (0)	Last edited by: k.bilic at: 4/17/2014 7:33 PM
Suggestion To thank Quote Answer

4/17/2014 9:30 PM	Rate (0)
zako_ Gold Member Joined: 5/22/2012 Last visit: 3/24/2022 Posts: 895 Rating: (65)	Hello, first, you have to do a commissioning with the tool STARTER. Normally you use the basic positioner and standard- telegramm 111. S120 on S7-3xx: Programming with "STEP7 classic". So the STARTER would be included in the SIMATIC Manager ("DRIVE ES functionality"). Very helpful is the "FB283" (for cyclic and acyclic communication), see http://support.automation.siemens.com/WW/view/de/25166781 With TIAP, you should install the STARTDRIVE too. http://support.automation.siemens.com/WW/view/de/68034568 The FB283 would be available for S7-300/400 in the libraries: For SIMATIC S7-1200/1500 FB284 (much more comfort then FB283 for cyclic communication / FB286 for acyclic communication): Following the documentation for TIAP V12SP, but that`s no difference to V13: http://cache.automation.siemens.com/dnl/zI/zIzMjIzMQAA_68034568_DL/SINAMICS_Bausteine_TIA_PORTAL_V12_SP1_en.pdf BUT FOR S7-1500 THERE IS A FURTHER POSSIBILITY: Using the TECHNOLOGY OBJECTS (TO) - so the position interpolation would be done in the SIMATIC and you da a communiction via telegramm 5 (so no basic positioner !): http://support.automation.siemens.com/WW/view/de/90075558/0/en Best regards Zako

Suggestion To thank Quote Answer

4/17/2014 10:08 PM	Rate (0)
k.bilic Posts: 19 Rating: (0)	Thanks If I will have more questions I will not hesitate to ask
k.bilic Posts: 19 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on