Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

positive and negative edge

Created by: ercanbozi at: 9/4/2010 2:20 PM (1 Replies)

Rating (2)

Thanks 1

2 Entries

9/4/2010 2:20 PM	Rate (0)
ercanbozi Posts: 71 Rating: (0)	Hi; I want to create positive and negetive edges on Step5.Could you someone knowing about it,give me a clue? thnks!
ercanbozi Posts: 71 Rating: (0)
Suggestion To thank Quote Answer

9/4/2010 5:18 PM	Rate (2)
dchartier Grandmaster Joined: 9/27/2006 Last visit: 10/14/2024 Posts: 12287 Rating: (2685)	Hello ercanbozy; From the S5-95U/100U manual, here is an example of edge detection programming (see attachment). Should be easy enough to adapt to negative edge detection. Hope this helps, Daniel Chartier Attachment S5 edge detection.jpg (739 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users JovanMota

|

Share this page:

Share this page on...

Follow us on