Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

POTAL V11 SP2 - S110 - 1200

Created by: Evertom Scopim at: 2/11/2014 4:00 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/11/2014 4:00 PM	Rate (0)
Evertom Scopim Bronze Member Joined: 12/23/2008 Last visit: 1/13/2025 Posts: 29 Rating: (6)	I’m working in a test application, and in this application I need to control the position of a S110 Sinamics. So as I used to do with s7-3xx, I was supposed to use the FB283. I found that the block has been released for s7-12xx as FB284. But I just found the block download library if I used TIA Portal V12(+startdrive), and I’m working in V11. Is there any way to get this block working in V11?

Suggestion To thank Quote Answer

2/13/2014 4:13 PM	Rate (0)
Cicero Gold Member Joined: 10/10/2005 Last visit: 1/17/2025 Posts: 1925 Rating: (136)	Hello, I'm sorry, but you need for application with the FB284 STEP 7 (TIA Portal) V12. With best regards Cicero

Suggestion To thank Quote Answer

2/14/2014 1:42 AM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 1/17/2025 Posts: 15541 Rating: (2465)	Evertom Scopim I’m working in a test application, and in this application I need to control the position of a S110 Sinamics. So as I used to do with s7-3xx, I was supposed to use the FB283. I found that the block has been released for s7-12xx as FB284. But I just found the block download library if I used TIA Portal V12(+startdrive), and I’m working in V11. Is there any way to get this block working in V11? If you use Support Request they should be able to send you a sample application for S7-1200 with TIA Portal V11.
	science guy
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on