Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Power 24VDC

Created by: PLC0709 at: 10/9/2021 9:22 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/9/2021 9:22 AM	Rate (0)
PLC0709 Advanced Member Joined: 6/19/2018 Last visit: 10/23/2023 Posts: 126 Rating: (0)	Hello, I have a CU240E-2PN and a PM240-2 for G120 So I wired L1, L2, L3 on PM240-2 as main power But I didn't wire on CU240E-2PN for control power When I was ON main power, CU240E-2PN is on Is it ok with this? What I have to do? Best regards, Lee

Suggestion To thank Quote Answer

10/9/2021 10:50 AM	Rate (0)
PISCEAN 2010 Diamond Member Joined: 4/23/2010 Last visit: 11/30/2023 Posts: 8058 Rating: (856)	Hello, If your drive is in network, then its always better to provide external 24V DC power supply to CU so that drive status can be communicated or available to controller even if input power supply to drive is OFF.

Suggestion To thank Quote Answer

10/15/2021 5:03 AM	Rate (0)
kingst1990 Member Joined: 11/2/2017 Last visit: 10/8/2022 Posts: 2 Rating: (0)	what’s your nationality? Your time is earlier than mine
	Last edited by: kingst1990 at: 10/15/2021 05:07:55
Suggestion To thank Quote Answer

10/15/2021 5:06 AM	Rate (0)
kingst1990 Member Joined: 11/2/2017 Last visit: 10/8/2022 Posts: 2 Rating: (0)	Hello, If no external 24VDC power supply is connected. Can the frequency converter be used normally?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_G

Follow us on