Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

power supply when connecting the WP231 with the PLC

Created by: lillu at: 3/15/2014 2:03 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/15/2014 2:03 AM	Rate (0)
lillu Posts: 1 Rating: (0)	hi when connecting the WP231 with the PLC, does the weighing module still require the 24V power supply? thanks
lillu Posts: 1 Rating: (0)	Last edited by: CS Moderator at: 3/17/2014 4:43 PM new subject after splitting from /tf/WW/en/Posts/99045#top Last edited by: lillu at: 3/15/2014 2:04 AM
Suggestion To thank Quote Answer

3/17/2014 8:58 AM	Rate (0)
ABenno Posts: 206 Rating: (22)	Hi Lillu, yes, even if the WP231 is connected to the CPU you need 24V supply for the WP231. Regards ABenno
ABenno Posts: 206 Rating: (22)	Last edited by: ABenno at: 3/17/2014 4:57 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on