Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Press display

Created by: Jackharrisoncaress at: 1/28/2016 1:31 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

1/28/2016 1:31 PM	Rate (0)
Jackharrisoncaress Posts: 3 Rating: (0)	Good afternoon, Im trying to program a HMI comfort screen to the best of my capabilities and i was wondering what is the best way to display the process of an industrial press machine. What i would like to display is the... Posicion of the pressure plate (vertically) Pressure of the press Time of the press cycle If there is any fault in the process a `Pop up´ that displays an image. Im trying to get the most that i can out of tia portal and all of its funcions, Thank you in advance for any tips/solutions!
Jackharrisoncaress Posts: 3 Rating: (0)
Suggestion To thank

1/29/2016 3:12 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4767 Rating: (123)	Closed cause question posted twice. The second thread with the subject Tia portal grafic display is published within the conference SIMATIC WinCC (TIA Portal). Best regards Min_Moderator

Suggestion To thank

|

Share this page:

Share this page on...

Follow us on