Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

pressing "EXIT" button in HMI, machine goes to Windows and not shutdown

Created by: Igor0k at: 7/22/2013 9:32 AM (12 Replies)

Rating (1)

Thanks 1

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

7/22/2013 9:32 AM	Rate (0)
Igor0k Posts: 14 Rating: (0)	After pressing "EXIT" button in HMI, machine goes to Windows and not shutdown. I must press Start->Shut Down every time. How to solve this problem?
Igor0k Posts: 14 Rating: (0)	Last edited by: CS Moderator at: 7/22/2013 1:02 PM new subject after splitting from /tf/WW/en/Posts/2838#top Last edited by: Igor0k at: 7/22/2013 10:13 AM
Suggestion To thank Quote Answer

7/22/2013 11:06 AM	Rate (1)
PISCEAN 2010 Diamond Expert Joined: 4/23/2010 Last visit: 11/23/2024 Posts: 8092 Rating: (880)	ExitButton= "True" ExitbuttonIndex=15 ;the access level of exit-button for various user classes ExitButtonAccessLevel = 7 ;a conformation Dialog-Box can be displayed ExitButtonQueryUser = False ;Reboot Dialog, coupled to access level 1 EnableRebootDialog = False Above extrat are from your attached regestry. Please carry out modifications as follows. Set Exit Button Query User = True Delete Enable Reboot Dialog = false line. Save the file, Power OFF, again Power ON & check. It will solve the problem.
	Last edited by: PISCEAN 2010 at: 7/22/2013 1:38 PM Error corrected
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users rmb_cardoso

7/22/2013 5:04 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	PISCEAN 2010 ExitButton= "True" ExitbuttonIndex=15 ;the access level of exit-button for various user classes ExitButtonAccessLevel = 7 ;a conformation Dialog-Box can be displayed ExitButtonQueryUser = False ;Reboot Dialog, coupled to access level 1 EnableRebootDialog = False Above extrat are from your attached regestry. Please carry out modifications as follows. Set Exit Button Query User = True Delete Enable Reboot Dialog = false line. Save the file, Power OFF, again Power ON & check. It will solve the problem. Hello Deep, If i understand your informations what you have explained ....where you need to change this details? Where is path? Which file you need to change in the HMI? Could you provide the details...that will be nice... Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

7/23/2013 6:06 AM	Rate (0)
PISCEAN 2010 Diamond Expert Joined: 4/23/2010 Last visit: 11/23/2024 Posts: 8092 Rating: (880)	Ekalavya PISCEAN 2010 ExitButton= "True" ExitbuttonIndex=15 ;the access level of exit-button for various user classes ExitButtonAccessLevel = 7 ;a conformation Dialog-Box can be displayed ExitButtonQueryUser = False ;Reboot Dialog, coupled to access level 1 EnableRebootDialog = False Above extrat are from your attached regestry. Please carry out modifications as follows. Set Exit Button Query User = True Delete Enable Reboot Dialog = false line. Save the file, Power OFF, again Power ON & check. It will solve the problem. Hello Deep, If i understand your informations what you have explained ....where you need to change this details? Where is path? Which file you need to change in the HMI? Could you provide the details...that will be nice... Regards, Prakash Hello Prakash, The user has attached the file of regestry.Please refer the attachehment user has attached in notepad format. So I suggest him to modify the regestry. Anyway this can be done either directly in file REGIE.INI or by user inetrface via start up ----> HMI ----> Settings ------> HMI Exit Mode. Regards, DEEP.

Suggestion To thank Quote Answer

7/23/2013 8:16 AM	Rate (0)
Igor0k Posts: 14 Rating: (0)	My regie.ini file (F:\mmc2)
Igor0k Posts: 14 Rating: (0)	Last edited by: CS Moderator at: 7/23/2013 2:17 PM Attachment deleted
Suggestion To thank Quote Answer

7/23/2013 8:31 AM	Rate (0)
PISCEAN 2010 Diamond Expert Joined: 4/23/2010 Last visit: 11/23/2024 Posts: 8092 Rating: (880)	Igor0k My regie.ini file (F:\mmc2) Hello, Is your problem solved?

Suggestion To thank Quote Answer

7/23/2013 9:05 AM	Rate (0)
Igor0k Posts: 14 Rating: (0)	Hi! I am waiting for customer's technician for checking. I just remotely carried out modifications. I will write here about results after his call.
Igor0k Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

7/25/2013 12:07 PM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	New question was splitted to changes after HMI Exit settings? Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank Quote Answer

8/2/2013 8:59 AM	Rate (0)
Igor0k Posts: 14 Rating: (0)	On 2 of 4 Machines it was possible to change settings by "HMI --> Settings --> HMI Exit Mode" to position "Exit HMI, then hibernate" and the problem was solved. But on 2 Machines (in the same settings) Machine goes to Windows and not shutdown
Igor0k Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

8/4/2013 11:43 AM	Rate (0)
PISCEAN 2010 Diamond Expert Joined: 4/23/2010 Last visit: 11/23/2024 Posts: 8092 Rating: (880)	Igor0k On 2 of 4 Machines it was possible to change settings by "HMI --> Settings --> HMI Exit Mode" to position "Exit HMI, then hibernate" and the problem was solved. But on 2 Machines (in the same settings) Machine goes to Windows and not shutdown Igor0k My regie.ini file (F:\mmc2) Can you attach the files from these 2 machines, as you have attached in earlier post?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on