Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

pressure input scaling

Created by: Bhelekhulu at: 11/16/2010 8:10 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/16/2010 8:10 AM	Rate (0)
Bhelekhulu Posts: 28 Rating: (0)	Hi Good people, can some one please explain or a code to scale the 4 to 20ma signal from the pressure transmitter and display it on the scada as pressure. pressure range = 0 to 500 kpa transmitter output = 4 to 20ma module input = 12 bits Thanks
Bhelekhulu Posts: 28 Rating: (0)
Suggestion To thank Quote Answer

11/16/2010 8:19 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 9/10/2024 Posts: 10228 Rating: (1181)	Hello, Follow http://support.automation.siemens.com/WW/view/en/1765297 BR, Hristo Mihalev

Suggestion To thank Quote Answer

11/17/2010 7:41 AM	Rate (0)
Bhelekhulu Posts: 28 Rating: (0)	Thanks
Bhelekhulu Posts: 28 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on