Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Previous Local Data

Created by: blurp76 at: 10/30/2014 1:58 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/30/2014 1:58 PM	Rate (0)
blurp76 Bronze Member Joined: 7/21/2010 Last visit: 3/9/2023 Posts: 45 Rating: (5)	Hi all, I'm trying to write an FC in SCL to compare two structures passed through ANY pointers. I already have code that works perfectly as long the two structures are located in DBs. What i'm trying to add now is trying to compare two structures that are located in the TEMP area of the caller FC. Inside the SCL I see that the pointer passed through has a memory area of B#16#87 (Previous Local Data). I've found that those areas can be accessed as 'V' areas but i can't find any example of the correct syntax. Any Help?

Suggestion To thank Quote Answer

10/30/2014 5:12 PM	Rate (0)
KM_AS Silver Expert Joined: 11/23/2011 Last visit: 3/14/2023 Posts: 202 Rating: (32)	Hello blurp76, please have a look on the following FAQ. Maybe it will help you with your problem: http://support.automation.siemens.com/WW/view/en/97552148 I hope so. Greetings, KM_AS

Suggestion To thank Quote Answer

10/31/2014 3:40 PM	Rate (0)
allmächt! Posts: 215 Rating: (6)	Hello, did you look up the following entry regarding ANY pointer? Regards
allmächt! Posts: 215 Rating: (6)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on