Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Proagent Error

Created by: Josh Elliott at: 6/6/2014 8:34 AM (5 Replies)

Rating (0)

Thanks 2

6 Entries

6/6/2014 8:34 AM	Rate (0)
Josh Elliott Posts: 204 Rating: (28)	Hi, I have installed proagent 7.0.3 ,when i opened the proagent in the project tree... It showing error"Connection to the step7 project interrupted"next it will leads to the configuration screen which all options are disabled. is there any additional config has to be done to the step 7 project???
Josh Elliott Posts: 204 Rating: (28)
Suggestion To thank Quote Answer

6/6/2014 11:39 AM	Rate (0)
Cicero Gold Member Joined: 10/10/2005 Last visit: 3/16/2023 Posts: 1909 Rating: (131)	Hello, I think you have to insert in the STEP 7 SIMATIC Manager, by "Insert > Station > ...". With best regards Cicero

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Josh Elliott

6/6/2014 1:29 PM	Rate (0)
Josh Elliott Posts: 204 Rating: (28)	Hi, In the same way i have added my hardware config.still error continues.
Josh Elliott Posts: 204 Rating: (28)
Suggestion To thank Quote Answer

6/10/2014 10:24 AM	Rate (0)
Kampi Posts: 366 Rating: (30)	Hello, so your WinCC flexible project is really part of the whole Step7-project? You're also having the PDIAG-Blocks in the S7-Program?Please post a picture of your project tree in Simatic Manager! nice regards
Kampi Posts: 366 Rating: (30)
Suggestion To thank Quote Answer

6/10/2014 12:51 PM	Rate (0)
Kampi Posts: 366 Rating: (30)	and please check also connection settings in WinCC flexible.. if there's everything alright.. nice regards
Kampi Posts: 366 Rating: (30)
Suggestion To thank Quote Answer

6/11/2014 6:55 PM	Rate (0)
Josh Elliott Posts: 204 Rating: (28)	Hi, problem solved,its WinCC SCADA............ Thanks for your support.
Josh Elliott Posts: 204 Rating: (28)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users S_Moderator

|

Share this page:

Share this page on...

Follow us on