Problème communication profinet S7-1500 et S120 CU310-2 PN

Bonjour, je vous contact car j'ai un problème de communication entre ma CPU S7-1500 et un variateur S1200 G310. Le variateur est visible pas l'automate mais le telegram PROFIsafe 30 n'est pas accessible.

La configuration des télégrammes est la sivante :

-Telegram 390(accessible)

-Telegram PROFIsafe 30 (non accessible)

-Telegram 4 (accessible)

Cette configuration est identique dans l'automate tout comme dans le variateur.

STARTER ne m'indique mais d'erreur ni d'avertissement lorsque je suis connecté au variateur.

Savez-vous pourquoi le telegram 30 n'est pas accessible ?

Merci d'avance.

Hello max-menan,

I'm sorry to say that I couldn't be for technical assistance.
But maybe some of the other community members will be able to do so.
So this is the translation of your request:

max-meman

Hello,
I contact you because I have a communication problem between my CPU S7-1500 and a S1200 G310 drive. The drive is visible to the PLC but the PROFIsafe 30 telegram is not accessible.
The configuration of the telegrams is the following:

• Telegram 390 (accessible) 
• Telegram PROFIsafe 30 (not accessible) 
• Telegram 4 (accessible) 

This configuration is identical in the controller as in the drive. STARTER tells me no error or warning when connected to the drive. Do you know why telegram 30 is not accessible?

Thank you in advance.

Please try to publish your post in english. We are a worldwide community that is communicating in english even when most of us are not native english speakers.

Good luck
Sabine