Problem/ERROR witx Siwarex CS

Hi!

Problem/ERROR witx Siwarex CS

I'm trying to read out the process value from a Siwarex CS module.

A simple CALL FB43 (SICS_BA) but I that a ERROR 16#08 appears in the instance DB after a while (500cycles).

I have tried 2 different IM151 types but this doesn't help.

The Siwarex is calibrated and works fine when I connect with Siwatool.

Is there som MODE switch for the Siwarex CS so it start sharing data With PLC or something else which I don't see.

I'm attaching a simple Project and 2 Pictures of my instance Block and the fail.

Please help me to make it work :)

Hi Icoto,

the Profibus needs to run in DPV1 mode.

Unfortunately you have a old CPU with FW V1.x, this FW doesn't support DPV1.

If you use a CPU FW >=V2.x you can set the DPV1 mode and it will work.

Regards

ABenno 

OK, thank you for the answer.

This is my test PLC, we have much newer in the factory, so I'll try again on it.