Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problem import HMI alarms

Created by: jairmaci at: 4/27/2015 1:10 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

4/27/2015 1:10 PM	Rate (0)
jairmaci Posts: 2 Rating: (0)	Hello, I'm working on a project using the TIA Portal V12 SP1, but I can not import alarms this showing an error "The totally Integrated Automation Portal has encountered a problem and needs to close.". Since export works well.
jairmaci Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

4/27/2015 1:25 PM	Rate (0)
eisenpferdreiter Posts: 1058 Rating: (93)	Hopefully this will help you: Transfer project from TIA v12 to WinCC 7.2 Configuration of Messages and Alarms in WinCC (TIA Portal) regards
eisenpferdreiter Posts: 1058 Rating: (93)
Suggestion To thank Quote Answer

4/27/2015 1:51 PM	Rate (0)
jairmaci Posts: 2 Rating: (0)	Thanks for answering, But there's nothing I can update or change the TIA HMI alarms, not to get this error? because the text list I export and import without error. Just the alarm when I import this problem occurs.
jairmaci Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

4/27/2015 3:38 PM	Rate (0)
eisenpferdreiter Posts: 1058 Rating: (93)	Maybe you should make a support request at Siemens. If they can help, it would be interesting when you post solution here. regards
eisenpferdreiter Posts: 1058 Rating: (93)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Alarms Messages

Follow us on