Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problem in changing mode of the module in CONFIGURATION CONSOLE

Created by: Pham_Vu_Hoang at: 9/2/2008 11:20 AM (5 Replies)

Rating (0)

Thanks 0

6 Entries

9/2/2008 11:20 AM	Rate (0)
Pham_Vu_Hoang Posts: 24 Rating: (0)	Hello, I want to change mode of the module in CONFIGURATION CONSOLE from PG operation to Configuration mode, but it seem not succeed I throught. Please have a look in my pdf attached for more details and tell me what wrong? Best Regards Hoangatsc Attachment Configuration Console.pdf (318 Downloads)
Pham_Vu_Hoang Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

9/2/2008 12:11 PM	Rate (0)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 12/2/2024 Posts: 10229 Rating: (1181)	hoangatsc Hello, I want to change mode of the module in CONFIGURATION CONSOLE from PG operation to Configuration mode, but it seem not succeed I throught. Please have a look in my pdf attached for more details and tell me what wrong? Best Regards Hoangatsc Hi more detail about this let's say error read in diagnostic in station configurator. Or read here: /tf/WW/en/Posts/9202 regards

Suggestion To thank Quote Answer

9/2/2008 1:20 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Dear Hoangatsc, I guess the issue is here that you did not load a HW Config to the PC yet. Without this HW Config the CP and the OPC Server are not configured and therefore not valid. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

9/2/2008 1:44 PM	Rate (0)
Pham_Vu_Hoang Posts: 24 Rating: (0)	Dear J_Bell I also read this tipic: /tf/WW/en/Posts/6375 I attached my HW config screenshot to compare with your. What is your opinion about my HW config? Regards Attachment HW config.gif (292 Downloads)
Pham_Vu_Hoang Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

9/2/2008 2:30 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 12/5/2024 Posts: 8780 Rating: (1172)	Dear hoangatsc, In my opinion your HW config does not match Station configuration editor. Index 1 is OPC and index 2 is IE general. Change HW config and download it to PC (using PC internal) Best regards, Wizard

Suggestion To thank Quote Answer

9/2/2008 3:27 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	You are right Wizard, not to mention that the PC Station configurator showsOPC and IE Interface and the HW Config Application and IE Interface. These are two different things to handle. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on