Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problem in changing OP77a Password

Created by: Masoud_Mehraban at: 10/19/2008 5:48 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

10/19/2008 5:48 PM	Rate (0)
Masoud_Mehraban Posts: 1 Rating: (0)	Dear all, Is it possible to change user password during OP77a runtime, using only HMI functionalities? It seems that this change is available only through WinCC flexible software. Thanks for your guidance.
Masoud_Mehraban Posts: 1 Rating: (0)	Last edited by: Masoud_Mehraban at: 10/19/2008 5:50 PM
Suggestion To thank Quote Answer

10/20/2008 9:57 AM	Rate (0)
The Body Gold Member Joined: 5/13/2008 Last visit: 12/18/2019 Posts: 836 Rating: (69)	Hi, to add a new user, you must have user administration authorization. Maybe this operating instructions are helpful (see also chapter 8.2.4.4): http://support.automation.siemens.com/WW/view/en/21084916
	mfG / Best regards Roland
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on