Problem in Module SM326 DO 10xDC24V/2A

I use Failsafe DO with CPU 414-4H but when I download my program to CPU , SF led of F-Do go to red state. I think an error occure in Failsafe DO you Can see Diagnostic Buffer of F-DO Module Bellow:

Diagnostic buffer of module FDO10xDC24V/2A

Order No./ Description Component Version
6ES7 326-2BF01-0AB0 Hardware 6
6ES7 326-2BF01-0AB0 Firmware V 2.0.10

DP master system: 1
Station: 3

Event 1 of 3: Event ID 16# F980:8031
Loss of Communication
External error, Incoming event

Event 2 of 3: Event ID 16# F980:0201
Monitoring time for data message frame exceeded
External error, Incoming event

Event 3 of 3: Event ID 16# F580:8006
Module not Assigned Parameters
Internal error, Incoming event




Parameter setting of Faisafe DO is Like Bellow:

Operating Mode : Safety mode Compliant with SIL2/AK4
Fdest : 3
DIP switch : 0000000011
Fmonitoring time (ms) : 2500
Diagnostic Interrupt : Active
Disable light test : Active
All of DO channels :---->Group Diagnostic : Active


Note that dipswitch in back of module set like parameter above :------> 0000000011
Hardware DIP switch setting in back of modoule= Software DIP switch setting in Hardware configuration = 0000000011

and address of DO start from 24

Please Help me to solve problem.

New question published by Girigopal is split to a separate thread with the subject Failsafe DO with CPU 414-4H, SF led of F-Do go to red state.

Best regards
Min_Moderator