Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

problem of PC station

Created by: ling780915@yahoo.com.tw at: 7/18/2013 7:42 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

7/18/2013 7:42 AM	Rate (0)
ling780915@yahoo.... Posts: 6 Rating: (0)	Dear All: Ihave a problem ,i'm use TIA portal V12's PC station add Wincc RT professional and i can't compile .The error message is: compilation not possible. the current user does not belong to the "SIMATIC HMI" group Howto solve the problems?? Is need to setting something?? please give me somedirection~ thanks all!! i have update my screenpicture! Attachment error.jpg (520 Downloads)
ling780915@yahoo.... Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

7/18/2013 8:24 AM	Rate (0)
Enia Experienced Member Joined: 9/12/2008 Last visit: 10/21/2023 Posts: 73 Rating: (2)	You have a special manual how to install the runtime version on a PC (connected to a domain). Check:https://support.automation.siemens.com/BAY/llisapi.dll?func=cslib.csinfo&objId=60605851&nodeid4=34677186&load=content&start=31&csSort=-DOCDATUMBEITRAG&lang=en&siteid=cseus&aktprim=4&objaction=csview&extranet=standard&viewreg=BAY Short: 1. install WinCC TIA on a local admin account 2. Add your PC to the domain 3. Add the domain user to the HMI group thats it! Check the document! Regards, Robert

Suggestion To thank Quote Answer

7/19/2013 4:49 AM	Rate (0)
ling780915@yahoo.... Posts: 6 Rating: (0)	Thank a lot for answer me. i have do that you say, but it's apear another problem i'm show the picture~ Attachment error2.jpg (569 Downloads)
ling780915@yahoo.... Posts: 6 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Fic2009_Art

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on