Industry Online Support
Technical Forum
Navigation
Problem on BIMA100 Quardroform woodstep machine with SINUMERIK 805SM controller.
Created by: tmhuynh2011 at: 3/31/2013 7:39 AM (2 Replies)
Rating 
Thanks 0
3 Entries
| 3/31/2013 7:39 AM | |
|
Posts: 2 Rating:
|
Dear All, My name is Tron from Vietnam. I have repairing the BIMA 100 Quardroform machine with SINUMERIK 805SM controller. I have fixed the issued on SIMODRIVE 611 and the software too. But I could not control the machine by JOG mode. I can’t press the soft key JOG, JOG-INC, JOG-REPOS and JOG-REF except OVERSTORE key (I can active this function and edit the parameter in this case). Please help me to fix this problem..... P/s: I have not much experience on this system and I tried contact to Siemens in Vietnam but they hadn’t idea for this case.. Thanks so much. Tron Attachmentpictures.zip (61 Downloads) |
Last edited by: O_Moderator at: 6/7/2013 7:25 PMpictures transferred to attachment |
|
| 4/1/2013 4:36 AM | |
|
Posts: 2 Rating:
|
Hi Karl, Sure, I have taken this picture from that machine... Thanks Karl,
|
Follow us on