Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problem Upgrade License V6.2

Created by: jayzx at: 11/14/2007 5:44 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/14/2007 5:44 AM	Rate (0)
jayzx Posts: 1 Rating: (0)	Hi all, we've buy WinCC V6.2 and also the Upgrade License for RC and Server (currently we use V6.0) We already upgrade to WinCC V6.2 and verified the "Upgrade License" using the ALM is Valid but we found on WinCC Explorer the License is "Demo". Please if any onecan help me about this problem. Regards.
jayzx Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

4/23/2008 10:32 AM	Rate (0)
Khaled_Ezzat Silver Member Joined: 9/7/2007 Last visit: 8/30/2023 Posts: 550 Rating: (61)	in the ALM you can find in the toolbar License key then choose license recover
	Best Regards
Suggestion To thank Quote Answer

4/23/2008 10:36 AM	Rate (0)
Ikkezelf Posts: 1084 Rating: (72)	You already rebooted the machine? You made sure you copied/installed the license on teh same Harddisk drive as where wincc is installed on? with regards, Ikkezelf
Ikkezelf Posts: 1084 Rating: (72)
Suggestion To thank Quote Answer

4/24/2008 6:00 PM	Rate (0)
Khaled_Ezzat Silver Member Joined: 9/7/2007 Last visit: 8/30/2023 Posts: 550 Rating: (61)	does the license appears in the Automation license manager or not if yes check if it is corrupted or not.
	Best Regards
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on