Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problem when I start WinCC V7.0

Created by: chenhaotj at: 4/1/2009 5:16 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/1/2009 5:16 AM	Rate (0)
chenhaotj Posts: 26 Rating: (0)	Dear everyone I encounter a problem about WinCC V7.0, It has been installed successfully on my laptop with winxp sp2. I have been prompted "server start failed check your DCOM settings" when I created one new project, or opened the old project which configured with Wincc V6.2. How could I solve it. Hope you could have time for my inquiries. Thanks in advance. Best regards
chenhaotj Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

4/1/2009 5:56 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 7/12/2023 Posts: 10221 Rating: (1177)	Hello chenhaotj, This problem has already discussed several times here. I suggest you to check this DCOm settings . maybe there you can find a lot suggestions and other helpfull links. Hope this will helps. Best regards

Suggestion To thank Quote Answer

4/1/2009 6:39 AM	Rate (0)
chenhaotj Posts: 26 Rating: (0)	Thank you very much indeed
chenhaotj Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on