Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problem while configuring analog output. Analog module 334

Created by: Haridas Achuthan at: 10/11/2014 3:04 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

10/11/2014 3:04 PM	Rate (0)
Haridas Achuthan Posts: 3 Rating: (0)	Dear All, I have a problem while configuring analog output. I sued FC105 for scaling speed input. the range is low limit 0 and high limit 300 and scaled aouput of FC105 moved to Analog output. But the value- voltage 0-10V output not matching with the ratio input which Iam giving in hmi. Please help how I can solve this problem. Please find the attached sheets of my program.-Analog module 334 ai4.a02x8bit. Attachment program part.pdf (125 Downloads)
Haridas Achuthan Posts: 3 Rating: (0)	Last edited by: Min_Moderator at: 10/13/2014 3:53 PM New subject after splitting from /tf/WW/en/Posts/37798#top
Suggestion To thank Quote Answer

10/11/2014 4:42 PM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 10/6/2024 Posts: 4620 Rating: (708)	Haridas Achuthan Dear All, I have a problem while configuring analog output. I sued FC105 for scaling speed input. the range is low limit 0 and high limit 300 and scaled aouput of FC105 moved to Analog output. But the value- voltage 0-10V output not matching with the ratio input which Iam giving in hmi. Please help how I can solve this problem. Please find the attached sheets of my program.-Analog module 334 ai4.a02x8bit. Hello, The FC105 in IN=Integer value 0-27648 and OUT= is REAL Try to put in HI_LIM=300.0 and LO_LIM=0.0 fix value for test Put in IN=e.g. 13824 and look the result in OUT should be 150.0 https://support.automation.siemens.com/WW/llisapi.dll/1765297?func=ll&objId=24148558&objAction=csView&nodeid0=10805166&lang=en&siteid=cseus&aktprim=0&extranet=standard&viewreg=WW&load=treecontent
	Last edited by: Ste39 at: 10/11/2014 4:45 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on