Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

problem WinCC runtime.

Created by: noviz at: 1/21/2008 5:23 AM (11 Replies)

Rating (1)

Thanks 1

Result pages:: |; 1 | 2; |

12 Entries

Entries per page: 10 | all

1/21/2008 5:23 AM	Rate (0)
noviz Posts: 4 Rating: (0)	i already have WinCC project was created at WinCC v5.1. and link to simatic project created in Simatic S7 V5.1. know i use simatic S7 V 5.4 SP3 and WinCC V6.0 SP4. i already migration project to winCC 6.0. problem are run time can not activate.the project can only be activated if an available server has been entered in computer list. after i looked at computer there are already have existing server can not be deleted. please help me to step for communition between simatic and winCC.
noviz Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

1/22/2008 10:42 AM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, I don´t understand exactly what your problem is. But maybe this FAQ can be interesting for you http://support.automation.siemens.com/WW/view/en/16749678 April
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

1/23/2008 2:12 PM	Rate (1)
Natero Posts: 9 Rating: (1)	Hi there. Have You looked that name of computer is right? (WinCCExplorer - computer properties - General - computer name). Regards Natero ps. Sorry if solution was too stupid or too obvious
Natero Posts: 9 Rating: (1)
Suggestion To thank Quote Answer

1/31/2008 8:02 AM	Rate (0)
noviz Posts: 4 Rating: (0)	i try to capture picture in my computer. please see attachment. i wait for your respon. best regard Attachment run time can not activated.pdf (620 Downloads)
noviz Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

1/31/2008 2:42 PM	Rate (0)
Natero Posts: 9 Rating: (1)	And what is happening if You select Start Server Locally? When I start new version of runtime on any computersame kind question appears.Yes is right answer on that question.
Natero Posts: 9 Rating: (1)
Suggestion To thank Quote Answer

2/1/2008 4:47 AM	Rate (0)
noviz Posts: 4 Rating: (0)	When i start locally winCC open the project, but when i open graphics designer, choose one of project. ( i cant edit for mouse action (C - action). new windows appear the server not available. and when i click for activated, new window appear (project only be activated if an available server has been entered in computer list. anyway server already exist in computer list. .
noviz Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

2/1/2008 7:08 AM	Rate (0)
Natero Posts: 9 Rating: (1)	Hi again Noviz. It seems You have different setup than we have here, so my solutions don't work. Is there different server and Your wincc RT acts like Client? Our server list is empty and computer name in wincc must match with the real name on the computer. That is enouhg when computer itself acts like server. Attachment Runtime_problem.zip (362 Downloads)
Natero Posts: 9 Rating: (1)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users OMKRIS2017

2/2/2008 7:17 AM	Rate (0)
noviz Posts: 4 Rating: (0)	Thank natero for helping me, you right, my mistake was not change server with my computer name, that way i cant run the runtime. best regard noviz
noviz Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

2/4/2008 6:59 AM	Rate (0)
Natero Posts: 9 Rating: (1)	You are welcome Noviz.
Natero Posts: 9 Rating: (1)
Suggestion To thank Quote Answer

5/12/2010 1:43 PM	Rate (0)
Saruca Posts: 122 Rating: (1)	Hi Natero, I was having the same problem when I started the Runtime. I was getting that same error message: "the project can only be activated if an available server has been entered in computer list". Finally, thanks to your help, I solved it. I don't know why but I had to change my computer name. The names matched anyway, but now I've changed it Runtime works perfectly. Thanks for your help
Saruca Posts: 122 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on