Hello.

I need help with downloading a project to a stand alone operator station with WinCC RT Prof.
I have a laptop with software development software installed (TIA Portal V14SP1:Step7+Wincc)
I created a single station, but I can't download it.
Communication is carried out via the Ehternet. The computer is available in a network environment. Downloading a project to an operator station is only possible via offline download.

If i load a visualization project into a file, i can open it, but there is no connection.

I solved this problem in the following way: I installed all the software from the engineering station, then deleted all the software and the connection appeared. But the project does not display any alarms and problems with logging.

I see my OS in Simatic Shell from ES, but i can not do remote activation (i see status: config, runtime). If i pressed "remote activate", i see "Server not available". For testing i using Simatic Net, but nothing helped.

At the engineering station, the project runs from a file without problems and displays all information from the PLC.

I do not know what to do. Maybe I forgot some little detail. Thanks in advance for your help

Hello,

Can you create the ".mcx" file?

Is the structure like that of the image?

Thanks for the answer.

Yes of course. This file is created.
The project opens and starts. Only there is no connection. And I can not download the project directly from the engineering station on the OS (only offline downloading).

Hi,

Did you remember to install Simatic Net on the Runtime OS?

SergKurgan

Thanks for the answer.

Yes of course. This file is created.
The project opens and starts. Only there is no connection. And I can not download the project directly from the engineering station on the OS (only offline downloading).

 the fields are ####.