Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problem with FB2 S_RCV

Created by: rausergi at: 11/3/2009 11:04 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

11/3/2009 11:04 AM	Rate (0)
rausergi Posts: 6 Rating: (0)	Hi, I have in my PLCone Modbus Master (6ES7 138-4DF11-0AB0) and I use FB2 (S_RCV v2.0)and FB3 (S_SEND v2.1)in order to request the Modbus Slaves information. Sometimes during the execution I receive from FB2 one error and the Status code associate is w#16#0830, my problem is that I can't find this code in any manual or faq...so I don't know where is the problem... Can anybody help me? Thank you.
rausergi Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

11/3/2009 12:02 PM	Rate (0)
Bilao Posts: 378 Rating: (47)	Hello LosPalotes, i don´t know much about your problem, but i found something here in the forum that might be helpful best regards bilao Attachment S7-Modbus-Error[1].JPG (568 Downloads)
Bilao Posts: 378 Rating: (47)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on