Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problem with FC LT_BT - Siemens Library

Created by: layudhi at: 3/31/2012 1:36 PM (14 Replies)

Rating (1)

Thanks 6

Result pages:: |; 1 | 2; |

15 Entries

Entries per page: 10 | all

4/6/2012 1:26 PM	Rate (0)
layudhi Posts: 60 Rating: (1)	Hi Aret, Did you mean to put the NW10 into 2 different network ? First Read_Clock and the second LT to BT ? ok, i will try then Thanks Regards, Layudhi
layudhi Posts: 60 Rating: (1)
Suggestion To thank Quote Answer

4/6/2012 2:19 PM	Rate (0)
BeVee Gold Member Joined: 7/18/2011 Last visit: 6/9/2023 Posts: 521 Rating: (88)	Hi layudhi, Did you changed code of FC62 too? Inside this block there is a call of FC1.If you renamed FC1 you should change code FC62 too, but this block is protected? Check Call Structure to see whether FC62 is calling FC1 or your 'renamed FC' I suggest you rename your FC1 to free FCx and change calling block to this new blocknumber as well. Copy FC1 from libraryto your program and don't change FC number. Kind regards, BV

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users layudhi

4/6/2012 4:30 PM	Rate (0)
layudhi Posts: 60 Rating: (1)	Hi BeVee Thanks a lot, I think, i have found my mistake I'll let you know as son as possible after i change my FC number Regards, Layudhi
layudhi Posts: 60 Rating: (1)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users O_Moderator BeVee

4/9/2012 7:32 AM	Rate (0)
Aret Posts: 2348 Rating: (262)	Nice work, BeVee, keep on!
Aret Posts: 2348 Rating: (262)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users BeVee

7/22/2012 7:25 AM	Rate (0)
layudhi Posts: 60 Rating: (1)	Hi All, after change my FC number to meet the FC62 requirement, the problem was solved Thanks All regards, layudhi
layudhi Posts: 60 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on