Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problem with internal tag and fiel in/out

Created by: spiwis at: 1/17/2008 7:39 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/17/2008 7:39 AM	Rate (0)
spiwis Posts: 35 Rating: (0)	Hello all, In my WinCC project, I make a test page. I use an internal tag to post in a field l/O If I start myview from the start page the field is grey. If I start my view from graphics designer, the entry field is not grey . I don't know why !!! Thank you for your help
spiwis Posts: 35 Rating: (0)
Suggestion To thank Quote Answer

1/17/2008 12:41 PM	Rate (0)
April Posts: 1776 Rating: (95)	If you start from Graphics designer, no user permit is checked. If You start from Control center, you need to create a user with the necessary permit and login as this user, the the field is not grey (access not allowed) Best regards April
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

1/21/2008 2:25 PM	Rate (0)
spiwis Posts: 35 Rating: (0)	Thank you very much I will keep you apprised of developments regards
spiwis Posts: 35 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on