Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

problem with my sinumerik840D HMI

Created by: Phoued at: 5/13/2010 4:03 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/13/2010 4:03 PM	Rate (0)
Phoued Posts: 2 Rating: (0)	hello Madan_mv I want just ask about a problem with my sinumerik840D HMI ; I have some question marks in some softkey (?????) I tried to load old backups but I still have the same problem. could help me please. Splitted from Expanding User Interface, HMI Advanced.
Phoued Posts: 2 Rating: (0)	Last edited by: O_Moderator at: 5/14/2010 11:15 AM new subject after splitting
Suggestion To thank Quote Answer

5/19/2010 7:34 AM	Rate (0)
Maddy. Posts: 20 Rating: (1)	Hi , Please let me know if this in continuation with old case or it is a new case . ??
Maddy. Posts: 20 Rating: (1)
Suggestion To thank Quote Answer

6/1/2010 12:33 PM	Rate (0)
Phoued Posts: 2 Rating: (0)	Hi my friend ; this is a new case; in my HMI sinumerik840D; I have a questions marks on some softkey; I need your help pleas
Phoued Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

6/7/2010 1:03 PM	Rate (0)
pfuser Silver Member Joined: 9/18/2006 Last visit: 1/22/2025 Posts: 595 Rating: (64)	Hi. Such it is possible, if in a body of the form of a mask you use alias, for example, HS1 = ($85012, se3, ac7) HS2 = ($85013, se1, ac7) HS3 = ($85014, se1, ac7) HS4 = ($85015, se1, ac7) HS5 = ($85016, se1, ac7) HS6 = ($85017, se1, ac7) HS7 = ($85018, se1, ac7) HS8 = ($85019, se1, ac7), etc And files of substitutions are not loaded. Check up in a file mbdde.ini, section [TextFiles]: UserZYK = a path and a file name_ Best regards.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on