Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problem with PLC CPU948

Created by: Huseynov Namig at: 9/7/2019 12:35 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/7/2019 12:35 AM	Rate (0)
Huseynov Namig Posts: 5 Rating: (1)	hello dear, I have almost same problem with PLC CPU948.In attached photo you can understand what is the problem.Can you help to solve this problem?! THANK YOU, ------------------------------------------------------------------------------------------ Split from Red indication is continuously blinking with HMI communication error. Attachment 20190905_141511.jpg (284 Downloads)
Huseynov Namig Posts: 5 Rating: (1)	Last edited by: Jen_Moderator at: 09/09/2019 07:16:58 New subject after splitting
Suggestion To thank

9/9/2019 7:18 AM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (172)	Closed cause question posted twice. The second thread with the subject Problem with PLC after changing drives on print machine is published within the conference SIMATIC S5 / STEP 5. Best regards Jen_Moderator

Suggestion To thank

|

Share this page:

Share this page on...

Follow us on