Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problem with PLC S7-319 and WINCC 5.1

Created by: ramzes at: 9/19/2007 12:44 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/19/2007 12:44 PM	Rate (0)
ramzes Posts: 5 Rating: (0)	Welcome. I have problem with S7-319 and WINCC 5.1. Sometimes server WINCC lose communication with PLC. In SIMATIC_S7_PROTOCOL_SUITE_01.LOG there is errors Errorcode 0xFFDF 410E! and Errorcode 0x0000 7001!. I think maybe it is to little memory RAM (there is 512 RAM). thank you! very much for response Ramzes
ramzes Posts: 5 Rating: (0)	Last edited by: ramzes at: 19.09.2007 20:34 Last edited by: ramzes at: 19.09.2007 20:34 Last edited by: ramzes at: 19.09.2007 13:18 Last edited by: ramzes at: 19.09.2007 12:45
Suggestion To thank

9/20/2007 11:29 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 3/23/2023 Posts: 4099 Rating: (192)	closed cause question posted twice. The second thread with the subject Problem with communication WINCC server and PLC S7319is published within the conference SIMATIC WinCC. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on