Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problem with SIMATIC Runtime manager

Created by: Davide78 at: 5/16/2022 4:15 PM (4 Replies)

Rating (1)

Thanks 2

5 Entries

5/16/2022 4:15 PM	Rate (0)
Davide78 Member Joined: 6/16/2014 Last visit: 1/24/2025 Posts: 5 Rating: (0)	Hi everyone! I have this problem with simulation with a project on TIA V17 Unified. Start simulation from TIA is ok but after in Runtime Manager I have this error: state "Partly Running" with orange icon. Also in my browser (Chrome) in locahost I have error e nothing appear. Some idea? Tks Attachment runtime_manager.jpg (1075 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_4054133

5/17/2022 11:55 AM	Rate (0)
itafusna Silver Expert Joined: 2/17/2020 Last visit: 1/24/2025 Posts: 1177 Rating: (217)	Hi Davide78, Please try to update the software to Update 3, restart the PC, stop the Runtime operation & update. Same behavior?
	A rating will be well appreciated.
Suggestion To thank Quote Answer

5/19/2022 2:37 PM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 1/24/2025 Posts: 14651 Rating: (1825)	Hello I Think this is a WinCC Unified topic. do you have created your Webserver certificate in Certificate manager and installed? Run again the Unified configurator and use only IP Adress Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

5/31/2022 11:58 AM	Rate (1)
Fred1816 Bronze-Expert Joined: 3/3/2021 Last visit: 11/12/2024 Posts: 271 Rating: (35)	Hi Davide78, Partly Running can have several causes. The causes that I know of are the following: 1) Check if the PC-Name is longer than 15 characters. If yes, shorten it to max. 15 characters 2) The user running the simulation has to be a member of the usergroups "PlcSimUser", "SIMATIC HMI" and "RTIL Trace Users" 3) Activated OPC Server without installed certificates. With best regards, Fred

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users c.livingston

10/26/2022 5:10 PM	Rate (0)
AutoGen_1466773 Joined: 9/23/2022 Last visit: 1/25/2023 Posts: 2 Rating: (0)	Hi! I'm having the same problem. What was your solution?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on