Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problem with Siwarex MS and CPU 216v2.0.2

Created by: aguxtc at: 10/1/2018 8:51 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

10/1/2018 8:51 AM	Rate (0)
aguxtc Posts: 4 Rating: (0)	Good morning, I have a problem with a Siwarex MS device and a CPU 226 v2.0.2 The problem is: when I change the CPU. We have to change the CPU because it has been broken. the new CPU has the same reference, but the fimware version is higher, from 2.0.1 (old) to 2.0.2, new When I install the new CPU, it loads its program and siwarex does not give me the value of weighing. The SIWAREX has no errors. I do not know if the CPU firmware can be the problem Do you have to modify the MicroScale blocks? Please help me.
aguxtc Posts: 4 Rating: (0)	Last edited by: aguxtc at: 10/1/2018 9:35:17 AM Last edited by: aguxtc at: 10/1/2018 9:37:21 AM Last edited by: aguxtc at: 10/1/2018 9:38:06 AM
Suggestion To thank Quote Answer

10/1/2018 1:13 PM	Rate (0)
ABenno Posts: 206 Rating: (22)	Hello aguxtc, as far as I know you don't need Change anything for the Siwarex MS if you Change the FW of the CPU. May be start from scratch with https://support.industry.siemens.com/cs/ww/en/view/22605342 . Manual https://support.industry.siemens.com/cs/ww/en/view/22600601 Regards ABenno
ABenno Posts: 206 Rating: (22)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on