Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problem with time SYNC: CPU412 -> CP443

Created by: darion at: 12/18/2009 8:32 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/18/2009 8:32 PM	Rate (0)
darion Posts: 1 Rating: (0)	Hello. I have got NTP Server on host 192.168.0.135/24. My 6GK7 443-1EX20-0XE0 has IP: 192.168.0.10/24. I also have CPU 6ES7 412-2XJ05-0AB0. Time synchronization beetwen 6GK7 443-1EX20-0XE0 - 192.168.0.10/24 (NTP Client) and 192.168.0.135/24 (NTP Server) is all right. How to enable time synchonization beetwen 6GK7 443-1EX20-0XE0 and CPU 6ES7 412-2XJ05-0AB0? Do I need more configuration: hardware or software - create some function block to send and receive this time? Regards, darion.
darion Posts: 1 Rating: (0)	Last edited by: darion at: 12/18/2009 10:01 PM Hello again. I resolved the problem. To have Time Sync. you need to do one thing: CPU412 -> Properities -> Diagnostic/Clock Tab -> set: In PLC - As slave. Regards, darion. Last edited by: darion at: 12/18/2009 10:00 PM
Suggestion To thank Quote Answer

1/7/2010 9:22 AM	Rate (0)
little holmes Experienced Member Joined: 12/9/2009 Last visit: 4/18/2024 Posts: 156 Rating: (11)	Hello, I have found the following article about time sychronisation: http://support.automation.siemens.com/WW/view/en/18130164 http://support.automation.siemens.com/WW/view/en/17990844 Maybe the article help you! Good Luck Little Holmes

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on