Szymbur

Someone solved problem with uploading project data from PLC S7-300? Because i have the same problem to . I have Portal TIA v11 SP2 SE Update 2.

Thread:
/tf/WW/en/Posts/63602

hdhosseini

Hello,

Normally,I prefer using STEP7 because still there is some points to be adapted with.as I consulted section 15.2.4 of THIS Reference.For uploading a project from a S7 300 CPU, it is necessary to
complete a suitable hardware in TIA and go online to the project and select ONLINE-->UPLOAD FROM DEVICE.But I think the best way is to upload the project with STEP7 and if you want to
work further on that, migrate it in TIA.For migration,you need both TIA Portal and STEP7.If you want to be sure for all support hardware for TIA check the catalog inside program or a list that be found here by search.