Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PROBLEM WITH "WSC/MSC" IN TURN

Created by: AGARCIA at: 1/4/2011 7:41 AM (5 Replies)

Rating (0)

Thanks 2

6 Entries

1/4/2011 7:41 AM	Rate (0)
AGARCIA Posts: 12 Rating: (0)	I'M IN A RETROFIT FOR TURN WITH SINUMERIK 840D. WITH SISTEM METRIC "MM" A PRESS RESET IN "MCP" IWATCHED SYSTEM "WSC" IN PULG. I CHANGE TO SYSTEM "MSC" I WATCHED IN "MM" IN AUTO/MDI WITH G71 GHANGE TO "MM" MY PROBLEM IS IN JOG. HOW CAN I SOLVE THIS??????? WHERE TO OBSERVE THE SETTINGS FOR TORN AND MILL TO . RESET AND START FOR PART PROGRAM- THANK-
AGARCIA Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

1/5/2011 12:33 AM	Rate (0)
OvidiuNastac Silver Member Joined: 1/29/2008 Last visit: 7/26/2022 Posts: 419 Rating: (19)	Hi Change the MD20150[12]=2. Good luck Nit
	Last edited by: Nit at: 1/5/2011 12:36 AM
Suggestion To thank Quote Answer

1/7/2011 7:56 AM	Rate (0)
makaveli Posts: 259 Rating: (5)	Hi, I have in my machine: 20150 $MC_GCODE_RESET_VALUES[12]=4 Anybody know why? Best regards Makaveli
makaveli Posts: 259 Rating: (5)
Suggestion To thank Quote Answer

1/7/2011 10:13 AM	Rate (0)
Pee El Sea Gold Member Joined: 1/19/2008 Last visit: 10/2/2024 Posts: 992 Rating: (64)	Hi, Group 13 G code reset value. Historicaly with G70/G71 Siemens only changed the distance from inch to metric or metric to inch. Leaving feedrate and tool lengths etc. in the system units. So G70 G1 X20 F200 would be a move of 20inches at a feedrate of 200mm/min G700/G710 also reads the feedrate and tool lengths in the units selected by the G code. If your system units are in metric then defaulting to G710 will do nothing anyway. Pee

Suggestion To thank Quote Answer

1/7/2011 10:25 AM	Rate (0)
ŠΜS Silver Member Joined: 6/7/2010 Last visit: 7/9/2024 Posts: 571 Rating: (37)	Dear Makaveli, Find the additional reference for you. Attachment 20150.pdf (183 Downloads)
	Regards, ŠΜS
Suggestion To thank Quote Answer

1/14/2011 6:55 PM	Rate (0)
AGARCIA Posts: 12 Rating: (0)	THANKS FOR THE SUPPORT THE MACHINE IS WORKING NOW DM20150 [12] = 1
AGARCIA Posts: 12 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users O_Moderator Ekalavya

|

Share this page:

Share this page on...

Follow us on