Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problems configuring Safety Integrated (Profisafe)

Created by: Iceman91 at: 1/15/2018 2:33 PM (6 Replies)

Rating (0)

Thanks 2

7 Entries

1/15/2018 2:33 PM	Rate (0)
Iceman91 Posts: 34 Rating: (0)	Hello ! I have been trying to configure safety functions on a double motor module drive. I have some problems with regards to Profisafe. I get a fault message "Safety function not supported by ProfiSafe". Can you please help me fix this problem? Thanks! Attachment profi.PNG (379 Downloads)
Iceman91 Posts: 34 Rating: (0)
Suggestion To thank Quote Answer

1/15/2018 4:11 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 1/22/2025 Posts: 5985 Rating: (824)	Hello, about this some more information are necessary: - which Fw-Version -which telegram is selected - ...
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

1/15/2018 4:43 PM	Rate (0)
Iceman91 Posts: 34 Rating: (0)	Hello FW version is 4.8 Telegram is Siemens telegram 110 for EPOS.
Iceman91 Posts: 34 Rating: (0)
Suggestion To thank Quote Answer

1/15/2018 5:13 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 1/24/2025 Posts: 22508 Rating: (3046)	Hello, you need a Safety Telegramm for PROFISafe. In another post you configure Telegram 30, is this not configured now? Which Safety Function you have activated? Regards Christoph
	Last edited by: ChristophD at: 1/15/2018 5:16:08 PM
Suggestion To thank Quote Answer

1/16/2018 9:59 AM	Rate (0)
Iceman91 Posts: 34 Rating: (0)	Hi Christoph, I have configured Telegram 30. When I configured Telegram 30 I got the following error messages. Here are the screenshots of my configuration... Attachment Images.zip (371 Downloads)
Iceman91 Posts: 34 Rating: (0)	Last edited by: Jen_Moderator at: 1/16/2018 11:42:36 AM Added all images as an attachment.
Suggestion To thank Quote Answer

1/16/2018 10:15 AM	Rate (0)
Iceman91 Posts: 34 Rating: (0)	I have activated STO, SS1, SLS
Iceman91 Posts: 34 Rating: (0)
Suggestion To thank Quote Answer

1/17/2018 8:44 AM	Rate (0)
Iceman91 Posts: 34 Rating: (0)	Good morning everybody! The problem I have described above has been solved. For anyone who is interested, the problems was with the option enabled during configuration. In the screenshot that I have attached, in the SLS configuration, the option - "Limit SLS via Profisafe" has been enabled and this was causing the problem. On disabling this particular option, my problem has been solved and the drive works as expected. Thanks again for everyone whoever tried to help. Have a good day!
Iceman91 Posts: 34 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users PISCEAN 2010 Jen_Moderator

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_General

Follow us on