Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problems downloading new code to S7-1200

Created by: Poljachina at: 2/29/2012 12:49 PM (17 Replies)

Rating (3)

Thanks 3

Result pages:: |; 1 | 2; |

18 Entries

Entries per page: 10 | all

2/29/2012 12:49 PM	Rate (0)
Poljachina Posts: 62 Rating: (0)	Hello all. I'm working with a S7-1200 - 1212 DC/DC/DC CPU and TIA basic v 11 + sp2 When I make a change in my code or if I add an element in my DB's and download it to the CPU the changes are not made, because in online mode those block are not identical and therefore I can not monitor these blocks, and can't work relay... If I compare the two block (offline to online), they are the same, even the green OK indicators are at every network. I have even deleted everything from the project and tried to download an empty OB1, but the same thing happens. The Offline block is not identical to the Online one... Could it be a faulty CPU, a bug in TIA portal. I have just started the repair funciton of the service pack 2 if it will help. Has anyone had a similar issue ? Any pointers would be great and appreciated. Thanks, best regards Ales
Poljachina Posts: 62 Rating: (0)
Suggestion To thank Quote Answer

2/29/2012 1:07 PM	Rate (0)
m_turk Posts: 25 Rating: (0)	I'm having the same problems today. Never had any problems with that before. My collegue has the same problem, today for the first time to, but with 1214DC/DC/Relay and with SP1. Weird..
m_turk Posts: 25 Rating: (0)
Suggestion To thank Quote Answer

2/29/2012 1:20 PM	Rate (2)
retsam Experienced Member Joined: 9/26/2011 Last visit: 8/30/2023 Posts: 5 Rating: (3)	Hello! Try changing the system date - i think there is a bug with 29/02...

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users GabrielM enof

2/29/2012 1:45 PM	Rate (0)
m_turk Posts: 25 Rating: (0)	I noticed that too.. Projects that are created earlier are working normaly... If you change them, and than continue, the problem starts.. But changeing the date doesn't help in my case :( Edit: It does help. You just need to change something in every block so that TIA compiles it again.. :)
m_turk Posts: 25 Rating: (0)	Last edited by: m_turk at: 2/29/2012 2:02 PM Last edited by: m_turk at: 2/29/2012 1:46 PM Last edited by: m_turk at: 2/29/2012 1:45 PM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users skvruil

2/29/2012 4:27 PM	Rate (0)
sawmaster Advanced Member Joined: 9/24/2009 Last visit: 3/13/2023 Posts: 16 Rating: (0)	Had same type of problem today. Went to go online and it shows everything is different. Changed the system date on my pc. Did a compile all and download all files. Everything seems to work the only problem is the PLC tags do not match.

Suggestion To thank Quote Answer

2/29/2012 5:41 PM	Rate (1)
Rawl Posts: 14 Rating: (1)	hello... even i had the same problem today...i jus created a sipmle program with jus q0.0 as an output. and down,loaded it inot the cpu 1214cDC/DC/DC...the out put led becomes on. biut i am not able to go online.. if i download my previous progrmans which i have created some days bac they work fine.but if i edit thise programs than again the same problem i reinstalled the software.i even changed my PLC. but still roblem persists. regards
Rawl Posts: 14 Rating: (1)
Suggestion To thank Quote Answer

2/29/2012 5:42 PM	Rate (0)
pauldoughty Advanced Member Joined: 1/14/2012 Last visit: 9/29/2023 Posts: 2 Rating: (0)	Set mine to 1st March and its working again

Suggestion To thank Quote Answer

2/29/2012 5:48 PM	Rate (0)
Rawl Posts: 14 Rating: (1)	hi, which system date did u change. laptop or PLC??? regards rawl
Rawl Posts: 14 Rating: (1)
Suggestion To thank Quote Answer

2/29/2012 6:02 PM	Rate (0)
pauldoughty Advanced Member Joined: 1/14/2012 Last visit: 9/29/2023 Posts: 2 Rating: (0)	Changed date on PC and then then set plc time from PC.

Suggestion To thank Quote Answer

2/29/2012 6:09 PM	Rate (0)
Rawl Posts: 14 Rating: (1)	thanks...will ttry.
Rawl Posts: 14 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on