Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Process Report

Created by: Manoranjan at: 6/11/2011 2:22 PM (25 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2 | 3; |

26 Entries

Entries per page: 10 | 20 | all

6/14/2011 8:39 AM	Rate (0)
Yer Posts: 86 Rating: (7)	Hi, yes is true, but then you have to make a trent with all process items to export > possible this are a lot of values, what result in a slow proces situation. second, with process object view you can make easely a export and then covert it to a input file for PM open export. > Also PMexport can make time controlled exports. Yer
Yer Posts: 86 Rating: (7)
Suggestion To thank Quote Answer

6/14/2011 8:30 PM	Rate (0)
ABN Posts: 212 Rating: (12)	correct. I am here suggesting one of the option. finally one should look for "cost" Vs"value" analysis of the configuration.
ABN Posts: 212 Rating: (12)
Suggestion To thank Quote Answer

6/15/2011 10:28 AM	Rate (0)
Jazz_M Gold Member Joined: 9/6/2008 Last visit: 5/7/2022 Posts: 1121 Rating: (86)	Hi Well true we can export the report value in csv and then convert it into .xls format but it t akes a long time and we need to teach every step to customer. Have fun...
	Jazz
Suggestion To thank Quote Answer

6/16/2011 3:36 AM	Rate (0)
Manoranjan Posts: 88 Rating: (0)	HIIIIIIII pls tell me how will I do in wincc Report Design. and also in trend page how to assign export.
Manoranjan Posts: 88 Rating: (0)
Suggestion To thank Quote Answer

6/16/2011 3:57 AM	Rate (0)
Niranjan Prasad Posts: 691 Rating: (37)	Manoranjan pls tell me how will I do in wincc Report Design. report designer
Niranjan Prasad Posts: 691 Rating: (37)
Suggestion To thank Quote Answer

6/17/2011 7:45 PM	Rate (0)
Jazz_M Gold Member Joined: 9/6/2008 Last visit: 5/7/2022 Posts: 1121 Rating: (86)	Hi for trend it is the same as the reprot you have designed, Please follow the link that has been given by Niranjan for the same. Have fun...
	Jazz
Suggestion To thank Quote Answer

6/21/2011 8:04 AM	Rate (0)
Manoranjan Posts: 88 Rating: (0)	Hiii TAGOLOVER....... Thanx again for your help. but in your attached file 'Reprot&layout' In fig-4.LAYOUT selection is REPORT.RPL which is not available with me. Pls explain the procedure to get your attached file With warm regards, Manoranjan
Manoranjan Posts: 88 Rating: (0)	Last edited by: Manoranjan at: 6/21/2011 8:11 AM
Suggestion To thank Quote Answer

6/21/2011 7:13 PM	Rate (0)
Jazz_M Gold Member Joined: 9/6/2008 Last visit: 5/7/2022 Posts: 1121 Rating: (86)	Hi well in the ZIP folder 1. you will have layout .rpl formats, copy the format in your wincc project folder. winccproject folder // --> under folder name "PRT" copy the layout that i gave you. They are .RPL formats. When you copy the .RPL then report format appear in the wincc project option report desginer --> layout. then follow the instruction as given in the procedure. Have fun...
	Jazz
Suggestion To thank Quote Answer

6/22/2011 6:41 PM	Rate (0)
Manoranjan Posts: 88 Rating: (0)	without copy your layout, pls tell me how to assign in my project. and how to activate the wincc report designer ....
Manoranjan Posts: 88 Rating: (0)
Suggestion To thank Quote Answer

6/24/2011 4:15 AM	Rate (0)
Jazz_M Gold Member Joined: 9/6/2008 Last visit: 5/7/2022 Posts: 1121 Rating: (86)	Hi well thats a long to tell about, But i shall make it little simpler for you. In WinCC, You have report designer right you will have two options Layout and Print JOB. The following procedure is same as for Trend control. 1. When you put a Eg. Table control go to property tab --> View Current print Job, If you search the same print Job in the WinCC Explorer you will have "@OnlineTableControl - Table" File, This file is used by wincc to ouput the Table content via the Layout that the user has programmed to Printer or any output device. 2. Go to property of the "@OnlineTableControl - Table" There will be a layout window where the layout for the table control shall be located. Default shall be "@OnlineTableControl - Table.RPL" locate this file in the layout --> english (united States) Folder. Open it. Now this file is your base file or the report format file. You can change the Page orientation as Portrait or Landscape. Your Header and footer are called Static part and the Mid portion is called Dynamic part. You can toggle between Static and Dynamic part by clicking on the button See attachment picture No 1 Now you can modify the layout picture and then attach it to the Print JOB by selecting the Option in the Print JOB property. Note: Please do not alter the Orginal file and folder Just do a save As and then Do you changes. I Hope it is clear. Have fun.... Attachment 1.JPG (232 Downloads)
	Jazz
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on