Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Profibus communication with drive

Created by: sus at: 5/28/2014 1:10 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/28/2014 1:10 PM	Rate (0)
sus Experienced Member Joined: 6/12/2009 Last visit: 5/20/2024 Posts: 75 Rating: (0)	Hello...... I want to make profibus communication between S7 300 (Simatic manager) and G120 (CU 240 E2). I have application of start commant and control speed through profibus. Also i want to read current and RPM through same. Pls. give sample program which include that all things. Thanks in advance, Susmit Prajapati.

Suggestion To thank

5/28/2014 1:11 PM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	Thread closed, because question is already published in the following thread Profibus communication Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on