Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Profibus DP Network

Created by: imanERC at: 3/25/2013 7:57 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/25/2013 7:57 PM	Rate (0)
imanERC Posts: 15 Rating: (0)	Dear Expert First of All I explain The Project,I should Monitor Data From 3 PLC With Profibus DP network,I should Use WinccV6.0 And One PC as server and some cilents,So the problem is all DP ports of CPU occupied by DP/DP coupler and Local Panel and each CPU has its own network,All PLC can connect to each other by Coupler as their Slaves,So The network of each CPU is work seprately,So I have 3 Cpu,two of them are 315-2DP and one is C7 CPU 635 OP,All PLC have Profibus network and The profibus Port Of each cpu Are used by Slave devices,and beside this,there is a coupler to exchange data between 2 master,SO i should read data from these three PLC by means of profibus DP network.How can i Do this?
imanERC Posts: 15 Rating: (0)
Suggestion To thank

3/26/2013 2:05 PM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 2/23/2023 Posts: 2685 Rating: (135)	Thread closed, because question is already published in the following thread read data from three PLC by means of profibus DP network Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on