Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Profibus DP Slave - Mettler Toledo IND560

Created by: annupalani at: 12/10/2008 5:02 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/10/2008 5:02 AM	Rate (0)
annupalani Posts: 26 Rating: (2)	Dear Experts For one of our project we are trying to hook up METLER TOLEDO IND560 Weighing system into Profibus network as DP Slave with CPU 319 as MASTER. We have installed reqd.GSD and also parameterised in Step 7 hw config.but still we couldnt able to communicate with Metler Toledo IND560. Kindly request you to give solution/suggestion to proceed with any specific steps. Thanks&Regards PALANI
annupalani Posts: 26 Rating: (2)
Suggestion To thank Quote Answer

12/10/2008 6:53 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 10/7/2024 Posts: 10229 Rating: (1181)	Hello annupalani, Can you give us more information. When you download hardware configuration to the CPU and after that go online is everything ok? You can see CPU and DP Slave without errors. How you detect no comunication with DP Slave? Check also profibus cable (connection and connectors). regards

Suggestion To thank Quote Answer

12/11/2008 7:50 AM	Rate (0)
annupalani Posts: 26 Rating: (2)	Hi Umencho Thank you so much for the reply. We could able to communicate with device now. Problem Observed: 1)Profibus Cable connectivity. Thanks&Regards Palani
annupalani Posts: 26 Rating: (2)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on