Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PROFIBUS PA

Created by: zorattigm at: 10/9/2008 8:39 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/9/2008 8:39 PM	Rate (0)
zorattigm Member Joined: 10/8/2008 Last visit: 1/6/2020 Posts: 2 Rating: (0)	Hi everyone I got a problem with a profibus PA link this link is compound for a master s7-400 , a slave DP IM-157 (DP-LINK) and DP-PA COUPLER Through the connection with the Simatic PDM v 5.2are possible view the process variables but don´t are writing in Analog Input corresponding The slaves PA are two flow transmitterMICROMOTION model 2400 If somebody can help me ,I would appreciate

Suggestion To thank Quote Answer

10/10/2008 4:00 AM	Rate (0)
dchartier Grandmaster-Expert Joined: 9/27/2006 Last visit: 3/21/2023 Posts: 11993 Rating: (2573)	Hello zorattign; Could you please post the HWConfig screen showing the configuration of these PA slaves in the DP-PA link? It would be especially important to see the addresses selected for each one. Regards, Daniel Chartier

Suggestion To thank Quote Answer

10/14/2008 12:23 AM	Rate (0)
zorattigm Member Joined: 10/8/2008 Last visit: 1/6/2020 Posts: 2 Rating: (0)	Dear: Submit the request, with the configuration screens HW Greetings Thank you Gabriel Attachment hardware_config_3.JPG (42 Downloads)

Suggestion To thank Quote Answer

10/17/2008 12:26 AM	Rate (0)
J_Bell Posts: 5822 Rating: (411)	Dear Gabriel, is it possible that your PC you use PDM with is not connected to the PROFIBUS us use? Best regards J_Bell
J_Bell Posts: 5822 Rating: (411)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on