Hello~

There is a problem with the equipment I use.

PROFIBUS FAULT occurs to the equipments connected to CP443-5 EXT Module in our CPU Rack.
It happens while the equipment is pausing.

Q1. The transmission speed of PROFIBUS in that module is set to 1.5Mbps. Is it ok to adjust the speed faster of slower?

Q2. Unless the error is due to the transmission speed, what else would the cause be? We tried replacing Module, cables and Repeater related to PROFIBUS Network. But the error still occurs
Here is the image of the Hardware as attached.

Closed cause question posted twice.

The second thread with the subject PROFIBUS FAULT is published within the Communication / Networks conference.

Best regards
Min_Moderator