Rating 
Thanks 0
| 7/13/2007 11:28 AM | |
|
Posts: 5822 Rating:
|
Hi, I modifiedyour two projects the way I think it should work. Let me just add one notice, please - do not change the System predefined Addresses in the HW Config for the I/O Areas, this leads into such bad problems. Here you go. Best regards J_Bell AttachmentTest2-Profinet_new.zip (606 Downloads) |
| 7/13/2007 11:28 AM | |
|
Posts: 5822 Rating:
|
2nd File.
AttachmentTest_Profinet_new.zip (664 Downloads) |
Last edited by: J_Bell at: 13.07.2007 11:29 |
|
| 7/13/2007 12:18 PM | |
|
Posts: 31 Rating:
|
Thank you for your help, but the problem remains. Can you tel me why do you assing de CPLADDR of the Profinet controler with 130? Thats what i don't understand... Thank you once again |
| 7/13/2007 1:24 PM | |
Joined: 3/21/2006 Last visit: 3/12/2025 Posts: 10239 Rating:
|
hi seeattachment. |
| 7/13/2007 1:58 PM | |
|
Posts: 5822 Rating:
|
Dear Andre, well, as said 130 hex is 304 dec. So as mentioned in your PM you have to follow the rule |
| 7/13/2007 2:52 PM | |
|
Posts: 31 Rating:
|
I think everithing is working now. In the status shows 8180, what i think it means that the comunication is ok. Thank you all for your help. One more thing, if i want to connect one more CP343-1 Lean as an Profinet IO device, how do i acess each one at a time through the PNIO_SEND or PNO_RECV blocks? |
| 7/13/2007 8:19 PM | |
|
Posts: 5822 Rating:
|
Hello Andre, you are right, this is one way to do so. Best regards J_Bell |
| 7/14/2007 10:49 AM | |
Joined: 1/7/2006 Last visit: 3/9/2025 Posts: 2705 Rating:
|
Hi Andre, On your first question that's right. On your 2nd question, for every CP343-1 as Profinet Device you have to do the trick again, place it on the Profinet, and define the data to communicate and place the PNIO_SEND/PNIO_RECV blocks. |
|
I hope that the answer will help, if you have still questions, don't hesitate to ask me. |
|
Follow us on