Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Profinet Configuration

Created by: Pietrofalconi at: 3/25/2010 2:42 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/25/2010 2:42 PM	Rate (0)
Pietrofalconi Posts: 4 Rating: (0)	Hi I need to configure a Profinet networkwith a CP 443-1 Advancedcard. I've assigned the IP adress on each devices ( printers, PG/PC), but i don't know how and where i can configure the SEND/RECEIVE blocks and which one exactly i must use. I need to transfer the datas ( from the external device to a DB ) Thanks for help Pietro I
Pietrofalconi Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

3/25/2010 3:07 PM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 12/10/2024 Posts: 2957 Rating: (243)	Hello, I think you should start from Simatic.NET documentation and examples. Try here: http://support.automation.siemens.com/WW/view/en/38015784 http://support.automation.siemens.com/WW/view/en/31764614 http://support.automation.siemens.com/WW/view/en/26558253
	Best regards, Darius
Suggestion To thank Quote Answer

3/26/2010 10:51 AM	Rate (0)
Pietrofalconi Posts: 4 Rating: (0)	Thanks Darius I'll have a look
Pietrofalconi Posts: 4 Rating: (0)	Last edited by: Pietrofalconi at: 3/26/2010 10:51 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on