Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Profinet diagnostics with ET200M

Created by: GEOCHRIS at: 2/4/2010 3:33 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

2/4/2010 3:33 PM	Rate (0)
GEOCHRIS Posts: 40 Rating: (0)	Hi, i work on a project with one PC(Wincc V6.2 SP3), one station with cpu 314 and a cp343-1 and two stations with ET200M(6ES7 153-4AA01-0XB0) at each one.The stations are communicating via profinet IO.I would like to have an indication on scada when one of the station is disconnected from the profinet.Can anyone help me? Thanks in advance
GEOCHRIS Posts: 40 Rating: (0)
Suggestion To thank Quote Answer

2/4/2010 4:27 PM	Rate (0)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 11/21/2024 Posts: 1525 Rating: (159)	GEOCHRIS Hi, i work on a project with one PC(Wincc V6.2 SP3), one station with cpu 314 and a cp343-1 and two stations with ET200M(6ES7 153-4AA01-0XB0) at each one.The stations are communicating via profinet IO.I would like to have an indication on scada when one of the station is disconnected from the profinet.Can anyone help me? Thanks in advance Hi Geochris, checked this FAQ it will help you out Profinet
	Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer

2/5/2010 9:38 AM	Rate (0)
GEOCHRIS Posts: 40 Rating: (0)	Thanks a lot for your answer, i am going to try it i will let you know what happened
GEOCHRIS Posts: 40 Rating: (0)
Suggestion To thank Quote Answer

2/8/2010 8:34 AM	Rate (0)
Wüstenräuber Gold Member Joined: 10/3/2008 Last visit: 1/21/2025 Posts: 967 Rating: (127)	Hello GEOCHRIS, have a look at this site: www.siemens.com/systemdiagnostics/ Profinet IO Device Diagnostics. In this addon the pictures in WinCC are included. Wüstenräuber

Suggestion To thank Quote Answer

2/10/2010 1:24 PM	Rate (0)
GEOCHRIS Posts: 40 Rating: (0)	Thanks for your reply but can you give me a more detailed description for the process, an example would be grate. I will try tomorrow to work with SFC51 but i would like to know and your way for diagnostics..
GEOCHRIS Posts: 40 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on