Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Profinet/Ethernet via TIA

Created by: sara-sh at: 8/29/2016 11:36 AM (34 Replies)

Rating (3)

Thanks 0

Result pages:: |; 1 | 2 | 3 | 4; |

35 Entries

Entries per page: 10 | 20 | all

8/29/2016 1:17 PM	Rate (0)
sara-sh Posts: 21 Rating: (0)	this is exactly my problem I use Ethernet interface as you can see on screens I use Ethernet in PC station and on PLC there is profinet interface. while there is no any selection options for Ethernet in setting.
sara-sh Posts: 21 Rating: (0)	Last edited by: shsh at: 8/29/2016 1:18:11 PM
Suggestion To thank Quote Answer

8/29/2016 1:19 PM	Rate (0)
Prof. Frink Platinum Expert Joined: 7/5/2013 Last visit: 11/28/2023 Posts: 2945 Rating: (481)	Hi, I, too, think you have to select the ethernet interface you are using for the connection to the PLC - maybe the Realtek controller. Can you "ping" the PLC? @Christoph: It took a little too long to write my last comment, so in the meantime shsh published the comment with the docx. Regards, Frink
	Pi is exactly three! All you have to do is think of things which people need but which don’t exist yet.
Suggestion To thank Quote Answer

8/29/2016 1:21 PM	Rate (1)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 11/28/2023 Posts: 11755 Rating: (1508)	Hello shsh perhaps you should check the basics first: https://support.industry.siemens.com/cs/de/en/view/89852595 Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

8/29/2016 1:26 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/28/2023 Posts: 21941 Rating: (2927)	shsh this is exactly my problem I use Ethernet interface as you can see on screens I use Ethernet in PC station and on PLC there is profinet interface. while there is no any selection options for Ethernet in setting. in the screen there is not seen that you use a Ethernet interface What we see is that youu try to connect the PLC with the VMWare virtual Ethernet Adapter VMNET1 and this is not possible!

Suggestion To thank Quote Answer

8/29/2016 2:00 PM	Rate (0)
sara-sh Posts: 21 Rating: (0)	Thank you.. I think this may help. but I cannot find "TCP/IP -> Ethernet adapter used" through "Start > Control panel > Set PG/PC interface".
sara-sh Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

8/29/2016 2:19 PM	Rate (1)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/28/2023 Posts: 21941 Rating: (2927)	Hello, 1.) Open the Control Panel of Windows , Switch in Kategiry to Small Icons, now PG/PC should be visible 2.) the settings in the PG/PC Dialog in the ControlPanel have no influence to TIA , TIA manage the Online Access in another way, so select thje Realtek Interface in the Dialog which you posted in you Doc File. Regards Christoph
	Last edited by: ChristophD at: 8/29/2016 2:20:15 PM
Suggestion To thank Quote Answer

8/30/2016 7:53 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 11/28/2023 Posts: 11755 Rating: (1508)	Hello shsh if you have a 64 Bit Operating System then in PGPCInterface it looks like: Networkcard.TCPIP.1 if you have 32 Bit System then TCP/IP-> Networkcard Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

8/30/2016 11:43 AM	Rate (0)
sara-sh Posts: 21 Rating: (0)	Tank you the problem is solved
sara-sh Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

8/30/2016 12:01 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/28/2023 Posts: 21941 Rating: (2927)	feel so free an say what was the solution for your problem! Thanks!

Suggestion To thank Quote Answer

8/30/2016 2:29 PM	Rate (0)
sara-sh Posts: 21 Rating: (0)	I changed PG/PC to Realtek as you said. and I checked just PLC for online and download. because one of problem was about wincc which was not established. I still have problem with WinCC runtime. I want just work with my laptop that program is running on it but it does not work! the error is "failed to established a connection to the device with address " it is another problem.. what can I do for connection between HMI and IE general Profinet interface? is it possible that I work just with my laptop as a HMI and operation ? or I should use another PC for HMI?
sara-sh Posts: 21 Rating: (0)	Last edited by: shsh at: 8/30/2016 2:32:12 PM
Suggestion To thank Quote Answer

Result pages:: |; 1 | 2 | 3 | 4; |

35 Entries

Entries per page: 10 | 20 | all

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on