Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PROFINET GSD files: ET 200S - Safety Modules missing

Created by: zslaci at: 8/24/2018 1:11 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

8/24/2018 1:11 PM	Rate (0)
zslaci Posts: 5 Rating: (0)	Hi everybody, I would have a question to Entry ID:19699080: the descriptions of the safety modules missing from the file im151-3.zip. How/where can I get those safety gsdml files and import into a third party (i.e.: Beckhoff) application? [snip] Thank you. Regards L.
zslaci Posts: 5 Rating: (0)	Last edited by: Jen_Moderator at: 8/24/2018 1:23:44 PM Optimized link. Last edited by: Jen_Moderator at: 8/24/2018 1:27:28 PM Division of questions into separate topics.
Suggestion To thank Quote Answer

8/24/2018 1:26 PM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 6/5/2023 Posts: 6941 Rating: (138)	New question published by zslaci is split to a separate thread with the subject GSDML for 1516F 3PN/DP. Best regards Jen_Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Jen_Moderator
Suggestion To thank Quote Answer

8/28/2018 1:37 PM	Rate (0)
zslaci Posts: 5 Rating: (0)	I've just received the answer: They are missing, because while the standard cards can be put on another manufacturer's CPU on Profinet, the safety cards can not! As the catalog of Siemens SWs contain the descriptions, there is no need to release them. (Except for my case.) L.
zslaci Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on