Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

program methodology for obtain count value using FM 350-1 with CPU 315-2DP

Created by: cvkumar at: 6/2/2012 1:31 PM (2 Replies)

Rating (2)

Thanks 0

3 Entries

6/2/2012 1:31 PM	Rate (1)
cvkumar Posts: 1 Rating: (1)	Hi Friends.. i am using IFM encoder for my project. so i have chosen fm-350-1 counter module and cpu 315-2dp. my application is to get continuous count value as the the shaft rotates at rated speed. using various count value i have to stop the motor at several interval.i have downloaded the library functions from forum but its odd to understand to use it for my application.so friends please give some programming methodolgy to obtain count value from counter module. thanks in advance -cvkumar.
cvkumar Posts: 1 Rating: (1)
Suggestion To thank Quote Answer

6/2/2012 8:11 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (999)	Please make clear what is your problem.
IBN-Service Posts: 8946 Rating: (999)
Suggestion To thank Quote Answer

6/3/2012 5:54 PM	Rate (1)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 9/18/2024 Posts: 1521 Rating: (227)	cvkumar Hi Friends.. i am using IFM encoder for my project. so i have chosen fm-350-1 counter module and cpu 315-2dp. my application is to get continuous count value as the the shaft rotates at rated speed. using various count value i have to stop the motor at several interval.i have downloaded the library functions from forum but its odd to understand to use it for my application.so friends please give some programming methodolgy to obtain count value from counter module. thanks in advance -cvkumar. Hello cvkumar, Find the DB for FC CNT_CTL1from the Manual - FM 350-1 Counter Function Module Installation and Parameter Assignment Address 34.0 (ACT_CNTV) has the actual count value. Is this what you are looking for?? Additionally the sample projects can be downloaded from the below URLs TIA Portal - Sample program FM 350-1 and FM 450-1 zEn23_01_FMx50-1.zip for TIA Portal V 11.0 + SP 2 Classic world - Configuration Package for FM 350-1 and FM 450-1 Counter Modules
	Like it? Rate it!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on