Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Program : Save hours and time

Created by: Chispas at: 10/23/2013 5:17 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

10/23/2013 5:17 PM	Rate (0)
Chispas Posts: 6 Rating: (0)	Hello. I have a Logo! 6ED1 052-1HB00-0BA5 and Logo!Soft Comfort v6.1.12 Can you do the following program? During a process i need to go in saving the hour it was turned on an entry, for example I1. Also save the hour it was turned off, how many times was turned on (x) and also how long he has been on every one of these x times. And at the end of the process get all these data.
Chispas Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

10/23/2013 6:45 PM	Rate (0)
Dion64 Posts: 47 Rating: (5)	I think you'd need a LOGO 0ba7 RCE with datalog function to be able to do that.
Dion64 Posts: 47 Rating: (5)	Last edited by: Dion64 at: 10/23/2013 6:46 PM
Suggestion To thank Quote Answer

10/23/2013 8:30 PM	Rate (0)
Toeternietoe Platinum Member Joined: 12/27/2006 Last visit: 11/29/2024 Posts: 1197 Rating: (113)	You can save this data in a textfield. Use a couter for every next data. And make a Textfield numbert with the counter. So you can have a max of 10 textfields in a 0BA5 serie of the LOGO! Look in the attachment for a first data saving Attachment Data.zip (220 Downloads)

Suggestion To thank Quote Answer

10/24/2013 3:36 PM	Rate (0)
allmächt! Posts: 215 Rating: (6)	Hello Chispas, you can go on using Logo! 6ED1 052-1HB00-0BA5 and Logo!Soft Comfort v6.1.12. Look up the function group "counter". Apply the function block "hours counter". Watch also the related help for parameter discription. Inside the frames on right hand side you can see the elapsed time the input I1 was set to "high" and below input I1 was set to "low". [img]/tf/WW/en/postattachments/download?attachmentId=40876&onlyInternet=False[/img] I am not sure wheter I got you 100% right. Where do you want to look up the values? * If you want to see the values on LOGO! display follow the recommendation of Toeternietoe. * If you want to see the values on PC you have to export them. The discription is to be found in this forum. Did this solve your problem? Regards Attachment D:\hourscounter.jpg (266 Downloads)
allmächt! Posts: 215 Rating: (6)
Suggestion To thank Quote Answer

10/25/2013 12:04 PM	Rate (0)
Chispas Posts: 6 Rating: (0)	Hello. Thank you for the answers. As I have to see in the Logo i am going to test the proposition Toeternietoe. 10 Records is enough. What does the 10 textfield are kept in memory? Or is deleted each time they are generated one?
Chispas Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on